Höganäs
Mapa do site
Countries
Brasil
Corporate Website
Russia
USA
Korea
China
Japan
Página Inicial
Quem somos
O conceito e os objetivos da empresa
Certificados
Meio Ambiente
A Tecnologia do Pó
Equipe Gerencial
Conselho de Administração
Governança Corporativa
Aplicações de pós
Componentes Sinterizados
Compostos Magnéticos Macios
Brasagem
Aplicações químicas e metalúrgicas
Filtragem de polímeros à quente
Enriquecimento com Ferro
Atrito
Indústria tipográfica
Filtros de aço inoxidável sinterizados
Revestimento de Superfícies
Soldagem
Sites Relacionados
Artigos Técnicos
Notícias do PoP Center
Somaloy® Update Newsletter
Artigos Técnicos
Contatos
Rede de Assistência Técnica
You are here
Página Inicial
»
Artigos Técnicos
»
Artigos Técnicos
Show all
10 Latest
nov 07, 2011
The Role of Porosity in Fatigue of PM Materials
In this paper it’s studied how density influences fatigue strength of two sintered steels; one standard, diffusion alloyed material and one sinter hardened...
out 25, 2011
An Approach to Cost Effective Low Alloyed Materials for MIM
One of the growth limiting factors for the MIM industry is said to be the material price. The relative material cost is lower for a smaller part compared to...
out 25, 2011
Enabling Coarser MIM Materials By Ferritic Sintering
MIM is a competitive component manufacturing method for 3D small structural parts manufactured by materials with fine powders. The fine powder, <10 µm,...
out 10, 2011
Cost Effective Material for Heat Treated Gear Applications
Heat treatment of PM components is often used in order to meet requirements on high hardness and other mechanical properties. Traditional processes such as...
out 10, 2011
High Performance Sinter Hardening Materials for Synchronizing Hubs
The development of synchronizing hubs goes towards more complicated shapes and higher performance, at the same time as there is a strong pressure on costs.
mai 20, 2011
Effect of Process Variables on the Dimensional Change of 434L Stainless Steel
The ferritic grades of stainless steel (400 series) undergo greater amounts of dimensional change (shrinkage) during sintering when compared to the...
mai 19, 2011
The Capability of a Bonded Mix to Improve the Precisions of a Powder Metal (PM) Component
In order to meet the increasing precision requirements of new applications, bonded mixes are required. Previous studies have shown that by bonding the finer...
mai 19, 2011
The Use of a New Machinability Enhancer for Improving the Machinability of Pre-Alloyed Powder Metal Components
To achieve better machinability of powder metallurgy (PM) components, machinability enhancers are often added. Recently a newly developed machinability...
mai 19, 2011
Dynamic Properties of Lean Diffusion Alloy Steel
Diffusion alloyed steels are known worldwide for their robustness and mechanical property performance. These alloys contain significant amounts of nickel,...
mai 19, 2011
The Use of a Newly Developed Machinability Enhancer for Improving the Machinability of Fe-Cu-C Components
The Fe-Cu-C material system is the workhorse material system for the powder metal (PM) industry. This alloy meets the strength and hardness requirements of...
Notícias do PoP Center
Somaloy® Update Newsletter
Artigos Técnicos