Brasil » Artigos Técnicos » Artigos Técnicos

Artigos Técnicos

Search

Show All

10 latest

2009-10-13

Advances in SMC Technology - Materials and Applications

Abstract: Soft Magnetic Composite (SMC) challenges traditional material such as soft magnetic ferrites and electrical steels in applications with...
2009-10-13

Means to improve machinability of sintered steels

Abstract:Powder metallurgy (PM) is a manufacturing method known to produce components to near net shape. Yet, sometimes machining operations are necessary...
2009-10-13

Analysis of oxide reduction during sintering of Cr-alloyed steel Powder through photoacoustic spectroscopy measurements

Abstract: The usage of steel powders prealloyed with chromium in PM components for high performance applications is steadily increasing. Excellent...
2009-10-13

Reduced sintering temperature creates new opportunities for PM Stainless Steel exhaust components

Abstract:Currently PM exhaust flanges and HEGO bosses are manufactured from 409L or 434 L stainless steel powder by employing high temperature, hydrogen...
2009-10-13

Achievable Properties after Different Heat Treatments of PM Steels

Abstract:Heat treatment of powder metallurgy components is often used in order to meet requirements on high hardness and other mechanical properties.
2009-10-13

Advanced Carbon Control in Sintering Atmospheres

Abstract:As the major driver for the Powder Metallurgy (PM) industry is the automotive industry, the sintering process now has to be more cost effective...
2009-10-12

High Performance Mixes with New Lubricant System

AbstractTo improve the performance of PM components higher density is one important approach. Lower amount of lubricant is often required to increase the...
2009-10-12

Influence of Sintering Temperature and Component Density on the Properties of Prealloyed PM Steel Grades Containing Cr, Mo and Mn

AbstractChromium, molybdenum and manganese are effective alloying elements suitable for low-alloyed structural steel components. Efficient use of these...
2009-07-01

Advances in Soft Magnetic Composites - Materials and Applications

PowderMet2009 in Las Vegas, USA
2009-06-30

Means to Improve Machinability of Sintered PM Steels

PowderMet2009 in Las Vegas, USA