Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

Nickel-based high velocity oxy-fuel (HVOF) powders

Höganäs nickel-based thermal spray powders for high velocity oxy-fuel (HVOF) deposition technique.

Amperit® nickel (Ni) based powders

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Water atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and abrasion resistant
  • Excellent machinability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNbAlTi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 19Cr 3.1Mo 5.1Nb 0.6Al 0.9Ti     
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent for corrosion resistant coatings
  • Hardenable
  • Very good for high temperature applications
  • Used in turbines and chemical equipment
  • Ni Superalloy 718
 
     

 

Nickel based (NiCrBSi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 0.7C 15Cr 4.4Si 3.2B 3.5Fe
Powder type: Gas atomised
Suitable for deposition techniques: HVOF

 

Nickel based (NiCrSiMn) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni <0.15C 19.5Cr 1.0Si 0.75Mn <0.7Fe
Powder type: Gas atomised
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Castolin HVOF Tero Jet 55125 = Stellite®* 7310

*Registered trademark of Kennametall Stellite

 
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Surfit® hard phase powders

Carbide mixes overlay welding powders

Höganäs offers a wide range of Surfit powder mixes with Ni self-fluxing (SF) alloys and tungsten carbides.

With a broad portfolio of Ni self-fluxing alloys in combination with different tungsten carbides, we tailor mixes to meet the application requirements.

  • Ni self-fluxing alloys
  • Amperweld® Tungsten carbides
    • Amperweld CTC - Cast Tungsten Carbides
    • Amperweld SCTC - Spherical Cast tungsten carbide
    • Amperweld MTC - Macroline Tungsten Carbide
  • Amperit® Tungsten carbide cobalt
    • Amperit 519 WC-Co 88-12
    • Amperit 526 WC-Co 83-17

Please contact your local Höganäs sales representative to find a matching Surfit mix for your application.

Particle size: -
Chemistry: 
Powder type: Blended
Typical deposition techniques: Flame spraying, HVOF, laser cladding, plasma transferred arc (PTA), powder welding

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Contact us
Contact form
Contact persons
Technical area: Surface coating
Select your country *
Type of contact * Sales
Sales
Technical support
Firstname *
Lastname *
Company *
Field of work *
CEO/owner
Purchasing
Design engineer
Business developer
Machine operator
Other
E-mail *
Phone of work *
Your message *

Privacy policy

I agree that Höganäs can handle my personal data in order to contact me. My contact information may also be used in marketing purpose, such as newsletters and other relevant information. The data will not be shared with a third party. With my consent, I also confirm that I am over 16 year old.

More information about how we handle personal data can be found in our privacy policy.

You must accept the terms of service before you can proceed.

Thank you for contacting us

We appreciate you contacting {{contact.TypeOfContact}} about {{contact.TechnicalArea}}.
One of our colleagues will get back to you shortly.

Have a great day!
/Höganäs

Something went wrong