Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

Oxide powders for atmospheric plasma spraying (APS)

Höganäs oxide thermal spray powders for atmospheric plasma spraying (APS) deposition technique.

Amperit® aluminium (Al)/titanium (Ti) oxide powders

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 90/45 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 20/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: <5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 30/5 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 35/15 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 13TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Compared with Amperit 742 less hard and corrosion resistant
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/5 µm
Chemistry: Al2O3 13TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Compared with Amperit 742 less hard and corrosion resistant
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/5 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 20/5 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 40/10 µm
Chemistry: Al2O3 28SiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Mullite
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: TiO2 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Black
  • Moderate wear resistance compared with Al2O3 or Al2O3-TiO2
  • Soluble in alkalis and sulfuric acid
  • Decorative black coatings
  • Slightly conductive
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Carc. 2.

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: TiO2 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Black
  • Moderate wear resistance compared with Al2O3 or Al2O3-TiO2
  • Soluble in alkalis and sulfuric acid
  • Decorative black coatings
  • Slightly conductive
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Carc. 2.

Amperit® chromium (Cr) oxide powders

Chromium (Cr) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 38/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 75/25 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2O25TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Alloyed as co-fused
  • Lower hardness but better toughness than pure Cr2O3 coatings
  • Used in wear applications where more toughness is needed e.g. on hydraulic cylinders in water engineering (in combination with a corrosion resistant bond coat e.g. Amperit 251 and a sealer if needed)
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2O25TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Alloyed as co-fused
  • Lower hardness but better toughness than pure Cr2O3 coatings
  • Used in wear applications where more toughness is needed e.g. on hydraulic cylinders in water engineering (in combination with a corrosion resistant bond coat e.g. Amperit 251 and a sealer if needed)
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2O3TiO5SiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, dense and wear resistant coatings
  • Good corrosion resistance
  • Higher mechanical shock resistance than pure Cr2O3
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 53/15 µm
Chemistry: Cr2O3TiO5SiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, dense and wear resistant coatings
  • Good corrosion resistance
  • Higher mechanical shock resistance than pure Cr2O3
 
     

 

Amperit® yttrium (Y) oxide powders

Other oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Y2O3 pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Stable at high temperatures
  • Heat resistant in aggressive atmospheres
  • Used as diffusion barrier on graphite sheets in the hard metal and steel industry
  • Max. operating temperature in air 2.200 °C (on graphite 1.550 °C)
 
     

 

Amperit® zirconium (Zr) oxide powders

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / HP / low norm
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: ZrO2 7Y2O3
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / DVCs
  • Blocky particle shape
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: ZrO2 7Y2O3
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / DVCs
  • Blocky particle shape
  • Also used for dense and vertically cracked coatings
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
  • Highest coating porosity achievable
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 90/16 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
  • For DVC’s (non columnar)
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/38 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 90/16 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 75/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 10Gd  10Yb 2Y
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Advanced lowK TBC material
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: Gd 2Zr2O7
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Advanced TBC
 
     

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Contact us
Contact form
Contact persons
Technical area: Surface coating
Select your country *
Type of contact * Sales
Sales
Technical support
Firstname *
Lastname *
Company *
Field of work *
CEO/owner
Purchasing
Design engineer
Business developer
Machine operator
Other
E-mail *
Phone of work *
Your message *

Privacy policy

I agree that Höganäs can handle my personal data in order to contact me. My contact information may also be used in marketing purpose, such as newsletters and other relevant information. The data will not be shared with a third party. With my consent, I also confirm that I am over 16 year old.

More information about how we handle personal data can be found in our privacy policy.

You must accept the terms of service before you can proceed.

Thank you for contacting us

We appreciate you contacting {{contact.TypeOfContact}} about {{contact.TechnicalArea}}.
One of our colleagues will get back to you shortly.

Have a great day!
/Höganäs

Something went wrong