2019/11/18
  • Additive manufacturing

High-purity powders for 3D printers: Höganäs starts construction of new plant in Germany

A new atomizing plant for production of high-purity metal powders for the 3D printing industry
Höganäs has reached an important milestone in the construction of its new atomizing plant for production of high-purity metal powders for the 3D printing industry. It is located at the Laufenburg production unit in Germany. In mid-September, the Freiburg Regional Council approved the construction and operation of the modern plant under the strict conditions of the German Federal Emission Control Act (BImSchG). The special powders will be sold worldwide under the trademark Amperprint®.

“The investment in the million-euro plant will help us to significantly increase our market share for metal powders in the promising segment of 3D printing,” says Höganäs’ site manager Peter Thienel. “In addition, we want to further increase the attractiveness of Höganäs as an employer in Germany and are confident that we can continue to offering our co-workers long-term professional development.”

The approval procedure was complex, as the ordinance bundles numerous, once separate, approvals and expert opinions. One of the prerequisites was that plant operation would not cause harm to the environment and that sufficient precautionary measures had been taken.

“We have proven this,” says Sylwia Paulus, responsible for Höganäs’ Health, Safety and Environment (HSE) in Laufenburg. “The reports contained extensive investigations and validations with regard to noise, emissions, fire protection and occupational safety. Ultimately, we fulfilled all the legal requirements within the framework, and beyond.”

Shortly after receiving the permit, construction work started in the plant building to dismantle stairs, landings, facades and roof. Completion is scheduled for the third quarter of 2020.

Additive manufactruring

More information

For more information please contact,
Ulrika Rask-Lindholm, SVP Communications, 
+46 42 33 80 00, ulrika.rask-lindholm@hoganas.com

 

作成者

Höganäs

3

営業・技術サポート部への問い合わせ

詳細情報およびご要望は、各販売会社にお問い合わせください。
お問い合わせ
問い合わせフォーム
担当者
Technical area: Additive manufacturing
{{country.text}}
営業 テクニカルサポート
最高経営責任者(CEO)/オーナー 調達 設計技術者 ビジネス開発者 機械装置オペレータ その他

お問い合わせいただきありがとうございます

{{contact.TechnicalArea}}について{{contact.TypeOfContact}にお問い合わせいただき、誠にありがとうございます。
後ほど担当の者より折り返しご連絡いたします。

どうぞよろしくお願いいたします。

エラーが発生しました

プライバシー保護に関する方針

私は、ヘガネスが、私と連絡をとる目的で、私の個人データを利用することに同意します。 また、私の連絡先情報をニュースレターやその他関連情報といったマーケティング目的に使用することに同意します。 データが第三者と共有されることはありません。 また、16歳以上であることを認めます。

個人情報の取扱いに関する詳細は、弊社のプライバシー保護方針でご確認いただけます。

利用規約に同意します
You must accept the terms of service before you can proceed. 利用規約に同意する必要があります。
Technical area: Additive manufacturing
{{country.text}}
営業 テクニカルサポート
{{contact.name}}
{{contact.name}}
販売会社
{{contact.position}}
{{contact.name}}
{{contact.name}}
{{contact.position}}