• Additive manufacturing

High-purity powders for 3D printers: Höganäs starts construction of new plant in Germany

A new atomizing plant for production of high-purity metal powders for the 3D printing industry
Höganäs has reached an important milestone in the construction of its new atomizing plant for production of high-purity metal powders for the 3D printing industry. It is located at the Laufenburg production unit in Germany. In mid-September, the Freiburg Regional Council approved the construction and operation of the modern plant under the strict conditions of the German Federal Emission Control Act (BImSchG). The special powders will be sold worldwide under the trademark Amperprint®.

“The investment in the million-euro plant will help us to significantly increase our market share for metal powders in the promising segment of 3D printing,” says Höganäs’ site manager Peter Thienel. “In addition, we want to further increase the attractiveness of Höganäs as an employer in Germany and are confident that we can continue to offering our co-workers long-term professional development.”

The approval procedure was complex, as the ordinance bundles numerous, once separate, approvals and expert opinions. One of the prerequisites was that plant operation would not cause harm to the environment and that sufficient precautionary measures had been taken.

“We have proven this,” says Sylwia Paulus, responsible for Höganäs’ Health, Safety and Environment (HSE) in Laufenburg. “The reports contained extensive investigations and validations with regard to noise, emissions, fire protection and occupational safety. Ultimately, we fulfilled all the legal requirements within the framework, and beyond.”

Shortly after receiving the permit, construction work started in the plant building to dismantle stairs, landings, facades and roof. Completion is scheduled for the third quarter of 2020.

Additive manufactruring

More information

For more information please contact,
Ulrika Rask-Lindholm, SVP Communications, 
+46 42 33 80 00, ulrika.rask-lindholm@hoganas.com





Contact sales & technical support

Contact your sales representative for more information and requests.
Contact us
Technical area: Additive manufacturing
Sälj Teknisk support
VD/ägare Inköpare Konstruktör Affärsutvecklare Maskinoperatör Annat

Tack för att du kontaktar oss

Vi uppskattar att du kontaktar {{contact.TypeOfContact}} om {{contact.TechnicalArea}}.
Någon av våra medarbetare kommer att kontakta dig inom kort.

Ha en trevlig dag!

Ett fel uppstod


Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.

Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.

Jag godkänner villkoren
You must accept the terms of service before you can proceed. Du måste godkänna villkoren för tjänsten för att fortsätta.
Technical area: Additive manufacturing
Sälj Teknisk support