11.6.2003 Pressing & Sintering

Comparision of Fatigue Properties of Heat Treated Gears Obtained by Double Pressing, Sintering and Warm Compaction

PM²TEC 2003, in Las Vegas, USA. Authors: Dave Milligan, Ulf Engström, Jim Lingenfelter, Senad Dizdar, Ingalill Nyberg. Warm Compaction of Densmix™ powders provides means to produce P/M parts with densities in the range of 7.1 to 7.4 g/cm³. As most properties are improved by increased density, the warm compaction method offers possibilities to increase the competitiveness of P/M compared to other manufacturing techniques. In this paper a comparison of material properties obtained by two different manufacturing routes is presented. Heat treated properties of some P/M steels after double pressing/sintering are compared with properties obtained with sinterhardening and conventional heat treating of warm compacted Densmix™ powders. Additionally, the single tooth static rupture force and the single tooth bending fatigue strength will be presented.

  • var content = UrlResolver.Current.Route(new UrlBuilder(linkItem.Href)) Download