Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

Pure metals, alloys and other material powders for atmospheric plasma spraying (APS)

Höganäs pure metals, alloys and other material thermal spray powders for atmospheric plasma spraying (APS) deposition technique.

Amperit® pure metals, alloys & other material powders

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 45/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/10 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 75/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
 
     

 

Tantalum (Ta) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Tantalum (Ta) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 90/16 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 355/200 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: <63 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Cold spraying, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Bond coat for EBC coatings

 
     

 

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • High Purity
 
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Polyester thermal spray powders

Particle size: 125/45 µm
Chemistry: Aromatic polyester
Powder type: -
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

AlSi-polyester thermal spray powders

Particle size: 125/10 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

AlSi-polyester thermal spray powders

Particle size: 125/38 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

Blended thermal spray powders

Particle size: 45/10 µm
Chemistry: CoNiCrAlY-CrC-CrB2-Y2O3 (43-25-7-25)  
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS), HVOF

     
 

Remarks:

  • Excellent build-up resistance, good wear resistance at high temperature and thermal shock resistance
  • Target application is furnace rolls in steel sheet annealing
 
     

 

Molybdenum silicide (MoSi) thermal spray powders

Particle size: 45/10 µm
Chemistry: MoSi2
Powder type: Sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Contact us
Contact form
Contact persons
Technical area: Surface coating
Select your country *
Type of contact * Sales
Sales
Technical support
Firstname *
Lastname *
Company *
Field of work *
CEO/owner
Purchasing
Design engineer
Business developer
Machine operator
Other
E-mail *
Phone of work *
Your message *

Privacy policy

I agree that Höganäs can handle my personal data in order to contact me. My contact information may also be used in marketing purpose, such as newsletters and other relevant information. The data will not be shared with a third party. With my consent, I also confirm that I am over 16 year old.

More information about how we handle personal data can be found in our privacy policy.

You must accept the terms of service before you can proceed.

Thank you for contacting us

We appreciate you contacting {{contact.TypeOfContact}} about {{contact.TechnicalArea}}.
One of our colleagues will get back to you shortly.

Have a great day!
/Höganäs

Something went wrong