Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

Get there now

Pure metals, alloys and other material powders for atmospheric plasma spraying (APS)

Höganäs pure metals, alloys and other material thermal spray powders for atmospheric plasma spraying (APS) deposition technique.

Amperit® pure metals, alloys & other material powders

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
  
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 45/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
  
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
  
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/10 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
  
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 75/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
  
     

 

Tantalum (Ta) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Tantalum (Ta) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 90/16 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 355/200 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: <63 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Cold spraying, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Bond coat for EBC coatings

  
     

 

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • High Purity
  
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Polyester thermal spray powders

Particle size: 125/45 µm
Chemistry: Aromatic polyester
Powder type: -
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
  
     

 

AlSi-polyester thermal spray powders

Particle size: 125/10 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
  
     

 

AlSi-polyester thermal spray powders

Particle size: 125/38 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
  
     

 

Blended thermal spray powders

Particle size: 45/10 µm
Chemistry: CoNiCrAlY-CrC-CrB2-Y2O3 (43-25-7-25)  
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS), HVOF

     
 

Remarks:

  • Excellent build-up resistance, good wear resistance at high temperature and thermal shock resistance
  • Target application is furnace rolls in steel sheet annealing
  
     

 

Molybdenum silicide (MoSi) thermal spray powders

Particle size: 45/10 µm
Chemistry: MoSi2
Powder type: Sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
  
     

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Kontakta oss
Kontaktformulär
Kontaktpersoner
Technical area: Surface coating
Välj land *
Typ av kontakt * Sälj
Sälj
Teknisk support
Förnamn *
Efternamn *
Företag *
Arbetsområde *
VD/ägare
Inköpare
Konstruktör
Affärsutvecklare
Maskinoperatör
Annat
E-post *
Telefon arbete *
Ditt meddelande *

Personuppgiftspolicy

Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.

Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.

Du måste godkänna villkoren för tjänsten för att fortsätta.

Tack för att du kontaktar oss

Vi uppskattar att du kontaktar {{contact.TypeOfContact}} om {{contact.TechnicalArea}}.
Någon av våra medarbetare kommer att kontakta dig inom kort.

Ha en trevlig dag!
/Höganäs

Ett fel uppstod

Plasma spraying (PTA) powders
Find your thermal spray powders with PowderFinder
Thermal surfacing
Learn more about surface coating, applications and deposition techniques
Technical service ArcX
ArcX technology centres
– Your starting point for innovation