Products

Powders for solid oxide fuel cells (SOFC) and solid oxide electrolysis cells (SOEC )

Using Ampergy® powders for SOFC and SOEC gives you a quality advantage because all products are fine and micron sized powders, offering high homogeneity and high purity along with a precise stoichiometry. Particle size, powder BET and chemistry are easily adjusted according to customer requirements. Exactly specified powder properties make it possible to set a defined sinter shrinkage that matches your specific system. Mixed powders (e.g. LSCF / GCO) can be offered in different, homogeneously mixed ratios. Our team of experienced professionals will assist you and give full technical support when you use our high-quality ceramic powders in industrial production.

Ampergy® powders for SOFC & SOEC

Ampergy® LSM30 Powder

Powder type
La0.65Sr0.30Mn1.0O3

BET m2/g
4.0 – 6.0

Typical applications

  • Screen Printing
  • For SOFC Cathode

Ampergy® LSM20 Powder

Powder type
La0.75Sr0.20Mn1.0O3

BET m2/g
1.5 – 3.5

Typical applications

  • Screen Printing
  • For SOFC Cathode

Ampergy® LSCF Powder

Powder type
La0.60Sr0.40Co0.20Fe0.80O3

BET m2/g
4.0 – 11.0

Typical applications

  • Screen Printing
  • For SOFC Cathode

Ampergy® LSM30 Powder

Powder type
La0.60Sr0.40Co0.20Fe0.80O3 / Gd0.XCe1-0.XO2

BET m2/g
4.0 – 6.0

Typical applications

  • Screen Printing
  • For SOFC Cathode
  • Also for SOEC mode

Ampergy® LSCM Powder

Powder type
La0.80Sr0.20Co0.10Mn0.90O3

BET m2/g
1.5 – 3.5

Typical applications

  • Screen Printing
  • Contact layer SOFC Cathode

Ampergy® LSC Powder

Powder type
La0.90Sr0.10CoO3

BET m2/g
4.0 – 6.0

Typical applications

  • Screen Printing
  • Contact layer SOFC Cathode

Ampergy® MCF Powder

Powder type
Mn1.0Co1.9Fe0.1O4

BET m2/g
2.0 – 4.0

Typical applications

  • As protective coating on Cr containing interconnectors

Ampergy® 10GCO Powder

Powder type
Gd0.1Ce0.9O2

BET m2/g
7.0 – 12.0

Typical applications

  • Screen Printing
  • For SOFC Cathode and Anode

Ampergy® 20GCO Powder

Powder type
Gd0.2Ce0.8O2

BET m2/g
7.0 – 12.0

Typical applications

  • Screen Printing
  • For SOFC Cathode and Anode

Ampergy® 40GCO Powder

Powder type
Gd0.4Ce0.6O2

BET m2/g
7.0 – 12.0

Typical applications

  • Screen Printing
  • For SOFC Cathode and Anode

Contact

Sales & Technical support
Get contacted by sales or technical support or find your contact.
Kontakta oss
Kontaktformulär
Kontaktpersoner
Technical area: SOFC / SOEC
{{country.text}}
Sälj Teknisk support
VD/ägare Inköpare Konstruktör Affärsutvecklare Maskinoperatör Annat

Tack för att du kontaktar oss

Vi uppskattar att du kontaktar {{contact.TypeOfContact}} om {{contact.TechnicalArea}}.
Någon av våra medarbetare kommer att kontakta dig inom kort.

Ha en trevlig dag!

Ett fel uppstod

Personuppgiftspolicy

Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.

Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.

Jag godkänner villkoren
You must accept the terms of service before you can proceed. Du måste godkänna villkoren för tjänsten för att fortsätta.
Technical area: SOFC / SOEC
{{country.text}}
Sälj Teknisk support
{{contact.name}}
{{contact.name}}
Säljare
{{contact.position}}
{{contact.name}}
{{contact.name}}
{{contact.position}}