Products
Powders for electromagnetic applications
Höganäs provides a wide range of uncoated soft magnetic powders with different alloying systems and particle size distribution. Please contact your sales representative for more information and requests.
Uncoated soft magnetic products
Fe6.5Si
High-alloyed Fe6.5Si is mainly used for soft magnetic high-frequency applications in so called dust-cores. The powder is difficult to compact and requires high pressures (1000-2000 MPa) and simple shapes. More common is use of the powder un-compacted, admixed in an insulating binder material to form a component. Excellent DC Bias performance, good temperature stability, high saturation flux density, low magnetostriction (low noise).
Phosphorus alloyed powder
PASC is ASC 100.29 alloyed with Ferro-phosphor aimed for demanding sintered soft magnetic components. Alloying increases electric resistivity, improve magnetic and machining properties. Is recommended with 0.45% or 0.8% P. MPIF FY-4500-20V/17X/17Y standards apply.
ABC 100.29 alloyed with Ferro-phosphor aimed for sintered soft magnetic components with premium performance. Alloying increases electric resistivity, improve magnetic and machining properties. Is recommended with 0.45% P. MPIF FY-8000-17V/15X/15Y standards apply.
Iron powder
Höganäs offers a spectrum of high purity iron powder qualities with different particle size distributions and particle morphology.
Examples:
ASC 100.29 is a pure iron powder for cost-effective sintered soft magnetic components. MPIF FF-0000-20U/X standard apply.
Contact us
Sales & Technical support
Personuppgiftspolicy
Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.
Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.