BrazeLet® Stop-off 11
a reusable brazing stop-off pen
A handy brazing stop-off pen for your brazing process
Stop-offs act as a barrier to the flow of brazing filler metals. There are many reasons why you need to control where the brazing filler metal goes, such as tolerances, following assembly steps or to prevent brazed parts from bonding to their furnace fixtures.
With a brazing stop-off pen you can avoid secondary processing, to get filler metal on surfaces where it is not supposed to go, or to be forced to reject and throw away ruined parts.
Our brazing stop-off pen is designed and recommended for general use. BrazeLet Stop-off 11 is working very well in high-temperature brazing together with any of our filler metals, in both vacuum and controlled atmosphere. With the brazing stop-off pen you can prevent the flow of the metal into protected areas and it does not cause contamination of the furnace atmosphere.
A reusable stop-off pen
Our brazing stop-off pen solution is reusable, so you don't need to buy a new pen every time its content is finished. Just refill it yourself and use it again. The refilling option decreases your cost per kilogram of stop-off used and is also good from a sustainability point of view. Another benefit with our brazing stop-off pen is that it is completely water-based and odourless.
Contact us
Sales & Technical support
Personuppgiftspolicy
Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.
Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.