Skip support structures when 3D printing parts with binder jetting
In the binder jetting process, a recoating blade spreads a thin layer of powder over the build platform. A carriage with inkjet nozzles passes over the powder bed, selectively depositing droplets of a binding agent that bond the powder particles together. When one layer is complete, the build platform moves downwards, and the blade recoats the surface of the part. The process is then repeated until the whole part is complete. After printing, the part is encapsulated in the powder. It is left to cure and gain strength. The part is removed from the powder bed and any loose powder is cleaned off.
The parts are in a “green” state when they are taken out of the binder jetting printer. Therefore, parts made with the binder jetting technique is sintered as a post-processing step to gain strength.
Binder jetting is suitable for making low-cost 3D printed metal parts, full-colour prototypes and large sand-casting cores and moulds.
Höganäs currently invests in new production capabilities of metal powders targeting binder jetting.
Contact us
Sales & Technical support
Personuppgiftspolicy
Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.
Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.
