Find your thermal spray powders with

PowderFinder

Carbide atmospheric plasma spraying (APS) powders

Höganäs carbide thermal spray powders for atmospheric plasma spraying (APS) deposition technique.

Amperit® chromium carbide (CrC) powders

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/5 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Blended
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse dense carbide
  • Max. operating temperature 870 °C
  • Good oxidation, abrasion, particle erosion, fretting and cavitation resistance
  • Hot gas corrosion resistant
  • Used in pump housing, machine parts, hydraulic valves, tooling, hot forming dies, etc.
 
     

 

Chromium carbides (CrC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr3C2 25(9.5Co 7.8Ni 5.6Cr 2Al 0.1Y)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 870 °C
  • Special product for applications at high temperatures such as furnace rolls in steel industry
 
     

 

Amperit® tungsten carbide (WC) powders

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Low C content: 3.6-4.1%
  • Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
  • Typically applied with sealer
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/22 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 90/45 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 90/45 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/10 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 63/32 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium WC
  • C: 5-6%
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Hard chrome replacement
  • Used for cylinder rods, ball valves, oil field equipment, steel process rolls, etc.
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Kontakta oss
Kontaktformulär
Kontaktpersoner
Technical area: Surface coating
{{country.text}}
Sälj Teknisk support
VD/ägare Inköpare Konstruktör Affärsutvecklare Maskinoperatör Annat

Tack för att du kontaktar oss

Vi uppskattar att du kontaktar {{contact.TypeOfContact}} om {{contact.TechnicalArea}}.
Någon av våra medarbetare kommer att kontakta dig inom kort.

Ha en trevlig dag!
/Höganäs

Ett fel uppstod

Personuppgiftspolicy

Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.

Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.

Jag godkänner villkoren
You must accept the terms of service before you can proceed. Du måste godkänna villkoren för tjänsten för att fortsätta.
Technical area: Surface coating
{{country.text}}
Sälj Teknisk support
{{contact.name}}
{{contact.name}}
Säljare
{{contact.position}}
{{contact.name}}
{{contact.name}}
{{contact.position}}