Carbide atmospheric plasma spraying (APS) powders

Remarks:

• Medium carbide
• Max. operating temperature 870 °C
• For dense oxidation and erosion resistant coatings
• Good cavitation resistance
• Hot gas corrosion resistant
• Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.

Remarks:

• Coarse dense carbide
• Max. operating temperature 870 °C
• Good oxidation, abrasion, particle erosion, fretting and cavitation resistance
• Hot gas corrosion resistant
• Used in pump housing, machine parts, hydraulic valves, tooling, hot forming dies, etc.

Remarks:

• Max. operating temperature 870 °C
• Special product for applications at high temperatures such as furnace rolls in steel industry

Remarks:

• Coarse WC
• Low C content: 3.6-4.1%
• Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
• Typically applied with sealer

Remarks:

• Very coarse WC
• Blocky particle shape
• C: 3.9-4.3%
• Hard, dense coatings with good abrasion, erosion and sliding wear resistance
• Used for machine parts, etc.

Remarks:

• Very coarse WC
• Blocky particle shape
• C: 3.9-4.3%
• Hard, dense coatings with good abrasion, erosion and sliding wear resistance
• Used for machine parts, etc.

Remarks:

• Very coarse WC
• Blocky particle shape
• C: 3.9-4.3%
• Hard, dense coatings with good abrasion, erosion and sliding wear resistance
• Used for machine parts, etc.

Remarks:

• Medium WC
• Max. operating temperature 500 °C
• Hard, dense coatings with good abrasion, erosion and sliding wear resistance
• Smooth coatings with fine microstructure and high bond strengths
• Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.

Remarks:

• Coarse WC
• Max. operating temperature 500 °C
• Higher ductility than WC 12Co due to higher Co content
• Hard, dense coatings with low sliding wear and high impact resistance
• Protection against fretting and abrasion
• Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.

Remarks:

• Coarse WC
• Max. operating temperature 500 °C
• Higher ductility than WC 12Co due to higher Co content
• Hard, dense coatings with low sliding wear and high impact resistance
• Protection against fretting and abrasion
• Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.

Remarks:

• Coarse WC
• Max. operating temperature 500 °C
• Higher ductility than WC 12Co due to higher Co content
• Hard, dense coatings with low sliding wear and high impact resistance
• Protection against fretting and abrasion
• Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.

Remarks:

• Medium WC
• C: 5-6%
• Max. operating temperature 500 °C
• CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
• Hard chrome replacement
• Used for cylinder rods, ball valves, oil field equipment, steel process rolls, etc.

Remarks:

• Fine WC
• Max. operating temperature 750 °C
• Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
• Smooth coatings with fine microstructure and high bond strengths
• Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.

Remarks:

• Fine WC
• Max. operating temperature 500 °C
• CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
• Useable in water based solutions and wet corrosive environments
• Smooth coatings with fine microstructure and high bond strengths
• Hard chrome replacement
• Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
• Finer particle size available only on request

Remarks:

• Fine WC
• Max. operating temperature 500 °C
• CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
• Useable in water based solutions and wet corrosive environments
• Smooth coatings with fine microstructure and high bond strengths
• Hard chrome replacement
• Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
• Finer particle size available only on request