Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

Get there now

Cold spraying powders

Höganäs thermal spray powders for cold spraying deposition technique.

Amperit® nickel (Ni) based powders

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
  
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
  
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
  
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
  
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
  
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
  
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
  
     

 

Nickel based (NiCrMoNbAlTi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 19Cr 3.1Mo 5.1Nb 0.6Al 0.9Ti     
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent for corrosion resistant coatings
  • Hardenable
  • Very good for high temperature applications
  • Used in turbines and chemical equipment
  • Ni Superalloy 718
  
     

 

Amperit® pure metals, alloys & other material powders

Tungsten (W) thermal spray powders

Particle size: 25/5 µm
Chemistry: W pure
Powder type: Sintered
Suitable for deposition techniques: Cold spraying, VPS/LPPS

     
 

Remarks:

  • Corrosion resistant against acids
  • Good high temperature stability in non-oxidising atmospheres
  • High melting point
  • Good adhesion to graphite, alumina and quartz
  
     

 

Tantalum (Ta) thermal spray powders

Particle size: 30/10 µm
Chemistry: Ta pure
Powder type: Special grade
Suitable for deposition techniques: Cold spraying

     
 

Remarks:

  • Lower oxygen content than Amperit 150
  • Dense coatings for highest corrosion protection against sulfuric acid
  • Improved mechanical properties
  • High deposition efficiency
  • Corrosion protection for chemical equipment against acids
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: <63 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Cold spraying, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Niobium (Nb) thermal spray powders

Particle size: 45/5 µm
Chemistry: Nb pure
Powder type: Fused and crushed
Suitable for deposition techniques: Cold spraying, VPS/LPPS

     
 

Remarks:

  • Corrosion resistant against several acids
  • Good high temperature stability in non-oxidising atmospheres
  
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Contact us
Contact form
Contact persons
Technical area: Surface coating
Select your country *
Type of contact * Sales
Sales
Technical support
Firstname *
Lastname *
Company *
Field of work *
CEO/owner
Purchasing
Design engineer
Business developer
Machine operator
Other
E-mail *
Phone of work *
Your message *

Privacy policy

I agree that Höganäs can handle my personal data in order to contact me. My contact information may also be used in marketing purpose, such as newsletters and other relevant information. The data will not be shared with a third party. With my consent, I also confirm that I am over 16 year old.

More information about how we handle personal data can be found in our privacy policy.

You must accept the terms of service before you can proceed.

Thank you for contacting us

We appreciate you contacting {{contact.TypeOfContact}} about {{contact.TechnicalArea}}.
One of our colleagues will get back to you shortly.

Have a great day!
/Höganäs

Something went wrong

Cold spraying powders
Find your thermal spray powders with PowderFinder
Thermal surfacing
Learn more about surface coating, applications and deposition techniques
Technical service ArcX
ArcX technology centres
– Your starting point for innovation