Find your thermal spray powders with

PowderFinder

Atmospheric plasma spraying powders

Höganäs thermal spray powders for atmospheric plasma spraying (APS) deposition technique.

Amperit® MCrAlY powders

MCrAlY (NiCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 22Cr 10Al 1Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCrAlY) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 22Cr 10Al 1Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCrAlY) thermal spray powders

Particle size: 125/45 µm
Chemistry: Ni 22Cr 10Al 1Y 
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Correspond to GE B50AG5 and Safran LA657 PE1
  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 90/45 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 125/45 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 38/10 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 90/53 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 125/45 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 38/10 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 23Co 17Cr 12.5Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCoCrAlTaReY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 18Cr 10Co 6.5Al 6Ta 2Re 0.3Y 1Si 0.5Hf 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Ta and Re containing MCrAlY for improved hot gas corrosion resistance
  • MCrAlY for stationary gas turbine applications
  • Availability only to OEM approved users
 
     

 

MCrAlY (NiCoCrAlTaReY) thermal spray powders

Particle size: 38/15 µm
Chemistry: Ni 18Cr 10Co 6.5Al 6Ta 2Re 0.3Y 1Si 0.5Hf 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Ta and Re containing MCrAlY for improved hot gas corrosion resistance
  • MCrAlY for stationary gas turbine applications
  • Availability only to OEM approved users
 
     

 

Amperit® molybdemum (Mo) based

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 45/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/10 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 75/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
 
     

 

Molybdenum silicide (MoSi) thermal spray powders

Particle size: 90/45 µm
Chemistry: MoSi2
Powder type: Sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Amperit® nickel (Ni) based powders

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), flame spraying

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), flame spraying

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Water atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and abrasion resistant
  • Excellent machinability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 5Al
Powder type: Water atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), flame spraying

     
 

Remarks:

  • Oxidation and abrasion resistant
  • Excellent machinability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), flame spraying

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 31Al
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Used as bond coat for various applications
  • Good corrosion resistance
  • High bond strength
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 20/5 µm
Chemistry: Ni 31Al
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Used as bond coat for various applications
  • Good corrosion resistance
  • High bond strength
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 30/5 µm
Chemistry: Ni 31Al 
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Used as bond coat for various applications
  • Good corrosion resistance
  • High bond strength
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: Atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNbAlTi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 19Cr 3.1Mo 5.1Nb 0.6Al 0.9Ti     
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent for corrosion resistant coatings
  • Hardenable
  • Very good for high temperature applications
  • Used in turbines and chemical equipment
  • Ni Superalloy 718
 
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Amperit® pure metals, alloys & other material powders

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 45/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 90/45 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/10 µm
Chemistry: Mo pure
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • Dense blocky grains
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 75/45 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
 
     

 

Molybdenum (Mo) thermal spray powders

Particle size: 53/15 µm
Chemistry: Mo pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 1%
  • See Amperit 105
 
     

 

Tantalum (Ta) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Tantalum (Ta) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ta pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Corrosion protection for chemical equipment against acids
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 90/16 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 355/200 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • High purity
  • Conforms to ASTM F-1580
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: <63 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Titanium (Ti) thermal spray powders

Particle size: 125/90 µm
Chemistry: Ti pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Good corrosion resistance against salt water, Cl containing solutions and oxidising acid solutions
  • Material for biomedical applications
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Flam. Sol 1.

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Bond coat for EBC coatings

 
     

 

Silicon (Si) thermal spray powders

Particle size: 75/20 µm
Chemistry: Si pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • High Purity
 
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Polyester thermal spray powders

Particle size: 125/45 µm
Chemistry: Aromatic polyester
Powder type: -
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

AlSi-polyester thermal spray powders

Particle size: 125/10 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques:Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

AlSi-polyester thermal spray powders

Particle size: 125/38 µm
Chemistry: AlSi 40Polyester
Powder type: Mix of AlSi12 and polyester
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Only on request
 
     

 

Molybdenum silicide (MoSi) thermal spray powders

Particle size: 90/45 µm
Chemistry: MoSi2
Powder type: Sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 320 °C (in oxidising atmospheres)
  • C max. 0.2%
  • Tough coatings with acceptable hardness and excellent sliding properties
  • Good bond strength
  • Used for valves, synchronisers, piston rings, pump parts, etc.
 
     

 

Amperit® chromium carbide (CrC) powders

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/5 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Blended
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse dense carbide
  • Max. operating temperature 870 °C
  • Good oxidation, abrasion, particle erosion, fretting and cavitation resistance
  • Hot gas corrosion resistant
  • Used in pump housing, machine parts, hydraulic valves, tooling, hot forming dies, etc.
 
     

 

Chromium carbides (CrC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr3C2 25(9.5Co 7.8Ni 5.6Cr 2Al 0.1Y)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 870 °C
  • Special product for applications at high temperatures such as furnace rolls in steel industry
 
     

 

Amperit® tungsten carbide (WC) powders

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Low C content: 3.6-4.1%
  • Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
  • Typically applied with sealer
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/22 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 90/45 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 90/45 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/10 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 63/32 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium WC
  • C: 5-6%
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Hard chrome replacement
  • Used for cylinder rods, ball valves, oil field equipment, steel process rolls, etc.
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Amperit® aluminium (Al)/titanium (Ti) oxide powders

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 90/45 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 20/5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: <5 µm
Chemistry: Al2O3 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Resistant against corrosion, abrasion, erosion and sliding wear
  • Excellent dielectric properties
  • Stable in most acids and alkalis
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 30/5 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 35/15 µm
Chemistry: Al2O3 3TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings
  • Typical applications in textile machines for guiding and handling of thread, rolls in paper industry, etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 13TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Compared with Amperit 742 less hard and corrosion resistant
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/5 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 20/5 µm
Chemistry: Al2O3 40TiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Lower hardness compared to Amperit 742 and 744
  • Wear and erosion resistant
  • Good grindability
  • Polished coatings with reduced wettability
  • Used in textile industry, household applications (pans), etc.
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 40/10 µm
Chemistry: Al2O3 28SiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Mullite
 
     

 

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: TiO2 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Black
  • Moderate wear resistance compared with Al2O3 or Al2O3-TiO2
  • Soluble in alkalis and sulfuric acid
  • Decorative black coatings
  • Slightly conductive
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Carc. 2.

Aluminium (Al)/titanium (Ti) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: TiO2 pure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Black
  • Moderate wear resistance compared with Al2O3 or Al2O3-TiO2
  • Soluble in alkalis and sulfuric acid
  • Decorative black coatings
  • Slightly conductive
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Carc. 2.

Amperit® chromium (Cr) oxide powders

Chromium (Cr) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, corrosion and wear resistant ceramic coatings
  • Insoluble in acids, alkalis and alcohol
  • Used for anilox rolls in printing and textile machines, pump seals areas, valve needles, wear rings, etc.
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/22 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 38/10 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 75/25 µm
Chemistry: Cr2Opure
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Rounded particle shape for better flowability and reduced wear of powder feeding parts
  • See Amperit 704
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 25/10 µm
Chemistry: Cr2O25TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Alloyed as co-fused
  • Lower hardness but better toughness than pure Cr2O3 coatings
  • Used in wear applications where more toughness is needed e.g. on hydraulic cylinders in water engineering (in combination with a corrosion resistant bond coat e.g. Amperit 251 and a sealer if needed)
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2O25TiO2
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Alloyed as co-fused
  • Lower hardness but better toughness than pure Cr2O3 coatings
  • Used in wear applications where more toughness is needed e.g. on hydraulic cylinders in water engineering (in combination with a corrosion resistant bond coat e.g. Amperit 251 and a sealer if needed)
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr2O3TiO5SiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, dense and wear resistant coatings
  • Good corrosion resistance
  • Higher mechanical shock resistance than pure Cr2O3
 
     

 

Chromium (Cr) oxides thermal spray powders

Particle size: 53/15 µm
Chemistry: Cr2O3TiO5SiO2
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Hard, dense and wear resistant coatings
  • Good corrosion resistance
  • Higher mechanical shock resistance than pure Cr2O3
 
     

 

Amperit® zirconium (Zr) oxide powders

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / HP / low norm
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: ZrO2 7Y2O3
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / DVCs
  • Blocky particle shape
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 22/5 µm
Chemistry: ZrO2 7Y2O3
Powder type: Fused and crushed
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White / DVCs
  • Blocky particle shape
  • Also used for dense and vertically cracked coatings
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
  • Highest coating porosity achievable
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 90/16 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
  • For DVC’s (non columnar)
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/38 µm
Chemistry: ZrO2 7Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Yellow
  • Very good thermal shock resistance and thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft, stationary gas turbines and engine applications like combustion liners and airfoils, etc.
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 90/16 µm
Chemistry: ZrO2 12Y2O3
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good thermal barrier properties
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 90/16 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 75/45 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/10 µm
Chemistry: ZrO2 7Y2O3
Powder type: Plasma spherodised/HOSP
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • White
  • Low impurities
  • Good thermal insulating properties
  • Hot corrosion resistant
  • Used for thermal barrier coatings in aircraft and stationary gas turbines
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: ZrO2 10Gd  10Yb 2Y
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Advanced lowK TBC material
 
     

 

Zirconium (Zr) oxides thermal spray powders

Particle size: 125/45 µm
Chemistry: Gd 2Zr2O7
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Advanced TBC
 
     

 

Amperit® yttrium (Y) oxide powders

Other oxides thermal spray powders

Particle size: 45/10 µm
Chemistry: Y2O3 pure
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Stable at high temperatures
  • Heat resistant in aggressive atmospheres
  • Used as diffusion barrier on graphite sheets in the hard metal and steel industry
  • Max. operating temperature in air 2.200 °C (on graphite 1.550 °C)
 
     

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Kontakta oss
Kontaktformulär
Kontaktpersoner
Technical area: Surface coating
{{country.text}}
Sälj Teknisk support
VD/ägare Inköpare Konstruktör Affärsutvecklare Maskinoperatör Annat

Tack för att du kontaktar oss

Vi uppskattar att du kontaktar {{contact.TypeOfContact}} om {{contact.TechnicalArea}}.
Någon av våra medarbetare kommer att kontakta dig inom kort.

Ha en trevlig dag!
/Höganäs

Ett fel uppstod

Personuppgiftspolicy

Jag godkänner att Höganäs hanterar mina personuppgifter för att kontakta mig. Min kontaktinformation kan även komma att användas för marknadsföringsändamål, som nyhetsbrev och annan relevant information. Uppgifterna kommer inte att delas med någon tredje part. I och med detta samtycke bekräftar jag även att jag är över 16 år.

Mer information om hur vi hanterar personuppgifter anges i vår personuppgiftspolicy.

Jag godkänner villkoren
You must accept the terms of service before you can proceed. Du måste godkänna villkoren för tjänsten för att fortsätta.
Technical area: Surface coating
{{country.text}}
Sälj Teknisk support
{{contact.name}}
{{contact.name}}
Säljare
{{contact.position}}
{{contact.name}}
{{contact.name}}
{{contact.position}}