Find your thermal spray powders with

Find your thermal spray powders with

PowderFinder

High velocity oxy-fuel (HVOF) powders

Höganäs thermal spray powders for high velocity oxy-fuel (HVOF) deposition technique.

Amperit® iron (Fe) based powders

Iron (Fe) based thermal spray powders

Particle size: 53/20 µm
Chemistry: Fe <0.03C 17Cr 2.5Mo  1.5Mn 12.5Ni 0.8Si 
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF

Iron based (FeCrNi) thermal spray powders

Particle size: 45/22 µm
Chemistry: Fe 28Cr 16Ni 4Mo
Powder type: Atomised (Special grade)
Suitable for deposition techniques: Atmospheric plasma spraying (APS), HVOF, HVAF

     
 

Remarks:

  • Excellent corrosion resistance
  • Used as bond-coat for ceramic topcoat in paper and printing industry or other processing industry
  • Special water atomisation provides a powder morphology similar to a gas atomisation
  • The Fe based Amperit 633 offers a sustainability advantage towards alternative Ni based products by its significantly lower upstream carbon footprint.
  •  
 
     

 

Amperit® MCrAlY-based powders

MCrAlY (NiCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 22Cr 10Al 1Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCrAlY) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 22Cr 10Al 1Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Correspond to GE B50AG5 and Safran LA657 PE1
  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 38/10 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (CoNiCrAlY) thermal spray powders

Particle size: 90/53 µm
Chemistry: Co 32Ni 21Cr 8Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlYHfSi) thermal spray powders

Particle size: 38/10 µm
Chemistry: Ni 22Co 17Cr 12.5Al 0.6Y 0.2Hf 0.4Si 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used as bond coats for TBCs, etc.
 
     

 

MCrAlY (NiCoCrAlY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 23Co 17Cr 12.5Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCoCrAlY) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ni 23Co 17Cr 12.5Al 0.5Y 
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Stable at high temperatures in hot corrosive or oxidising environments
  • Used on turbine blades, etc.
 
     

 

MCrAlY (NiCoCrAlTaReY) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 18Cr 10Co 6.5Al 6Ta 2Re 0.3Y 1Si 0.5Hf 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Ta and Re containing MCrAlY for improved hot gas corrosion resistance
  • MCrAlY for stationary gas turbine applications
  • Availability only to OEM approved users
 
     

 

MCrAlY (NiCoCrAlTaReY) thermal spray powders

Particle size: 38/15 µm
Chemistry: Ni 18Cr 10Co 6.5Al 6Ta 2Re 0.3Y 1Si 0.5Hf 
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS), VPS/LPPS

     
 

Remarks:

  • Ta and Re containing MCrAlY for improved hot gas corrosion resistance
  • MCrAlY for stationary gas turbine applications
  • Availability only to OEM approved users
 
     

 

Amperit® nickel (Ni) based powders

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and corrosion resistant
  • Good machinability
  • Used for repair, bond coat and corrosion protection
 
     

 

Nickel based (NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 20Cr
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 250
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Water atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Oxidation and abrasion resistant
  • Excellent machinability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiAl) thermal spray powders

Particle size: 45/5 µm
Chemistry: Ni 5Al
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Spherical alternative to Amperit 280
  • Better flowability
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 45/15 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, HVAF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNb) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 21Cr 9Mo 4Nb
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent oxidation and corrosion resistance
  • Used in boilers and in chemical industry
  • Ni Superalloy 625
 
     

 

Nickel based (NiCrMoNbAlTi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 19Cr 3.1Mo 5.1Nb 0.6Al 0.9Ti     
Powder type: Gas atomised
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS), cold spraying

     
 

Remarks:

  • Excellent for corrosion resistant coatings
  • Hardenable
  • Very good for high temperature applications
  • Used in turbines and chemical equipment
  • Ni Superalloy 718
 
     

 

Nickel based (NiCrBSi) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni 0.7C 15Cr 4.4Si 3.2B 3.5Fe
Powder type: Gas atomised
Suitable for deposition techniques: HVOF

Nickel based (NiCrSiMn) thermal spray powders

Particle size: 53/20 µm
Chemistry: Ni <0.15C 19.5Cr 1.0Si 0.75Mn <0.7Fe
Powder type: Gas atomised
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Castolin HVOF Tero Jet 55125 = Stellite®* 7310

*Registered trademark of Kennametall Stellite

 
     

 

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Amperit® pure metals, alloys & other material powders

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: Cold spraying,HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 90/45 µm
Chemistry: Ni pure
Powder type: Water atomised
Suitable for deposition techniques: HVOF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Good corrosion protection
  • Repair and bond coat for Ni-based alloys
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 45/22 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Nickel (Ni) thermal spray powders

Particle size: 35/15 µm
Chemistry: Ni pure
Powder type: Gas atomised
Suitable for deposition techniques: Cold spraying, HVOF, HVAF, Atmospheric plasma spraying (APS)

     
 

Remarks:

  • Repair and build-up for Ni-based alloy components
 
     

Hazards identification in advertising (REGULATION (EC) No 1272/2008 article 48): Skin sens. 1; Eye irrit. 2; Aquatic chronic 3; Carc. 2; STOT RE 1.

Blended thermal spray powders

Particle size: 45/10 µm
Chemistry: CoNiCrAlY-CrC-CrB2-Y2O3 (43-25-7-25)  
Powder type: Blended
Suitable for deposition techniques: Atmospheric plasma spraying (APS), HVOF

     
 

Remarks:

  • Excellent build-up resistance, good wear resistance at high temperature and thermal shock resistance
  • Target application is furnace rolls in steel sheet annealing
 
     

 

Amperit® chromium carbide (CrC) powders

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 30/5 µm
Chemistry: Cr3C2 20(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Cold spraying, HVOF, HVAF

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr3C2 20(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/22 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/10 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 38/10 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium carbide
  • Max. operating temperature 870 °C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/5 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Blended
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse dense carbide
  • Max. operating temperature 870 °C
  • Good oxidation, abrasion, particle erosion, fretting and cavitation resistance
  • Hot gas corrosion resistant
  • Used in pump housing, machine parts, hydraulic valves, tooling, hot forming dies, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 30/5 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Medium carbide, but finer than Amperit 584
  • Max. operating temperature 870°C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-NiCr) thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr3C2 25(Ni 20Cr)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium carbide, but finer than Amperit 584
  • Max. operating temperature 870°C
  • For dense oxidation and erosion resistant coatings
  • Good cavitation resistance
  • Hot gas corrosion resistant
  • Used for valve stems, turbine components, fuel rod mandrels, furnace rolls, hydraulic rods, etc.
 
     

 

Chromium carbides (CrC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: Cr3C2 25(9.5Co 7.8Ni 5.6Cr 2Al 0.1Y)
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Max. operating temperature 870 °C
  • Special product for applications at high temperatures such as furnace rolls in steel industry
 
     

 

Amperit® tungsten carbide (WC) powders

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVAF, HVOF

     
 

Remarks:

  • Coarse WC
  • Low C content: 3.6-4.1%
  • Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
  • Typically applied with sealer
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Coarse WC
  • Low C content: 3.6-4.1%
  • Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
  • Typically applied with sealer
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Low C content: 3.6-4.1%
  • Specially developed for Zn bath rolls in continuous galvanising lines (CGL)
  • Typically applied with sealer
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/22 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Very coarse WC
  • Blocky particle shape
  • C: 3.9-4.3%
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Used for machine parts, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/22 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/10 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 500 °C
  • Hard, dense coatings with good abrasion, erosion and sliding wear resistance
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Cold spraying, HVOF, HVAF

     
 

Remarks:

  • Fine WC
  • Higher apparent density than Amperit 518
  • Designed for higher deposition efficiency when sprayed with kerosene HVOF systems
  • See Amperit 518 or:
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Fine WC
  • Higher apparent density than Amperit 518
  • Designed for higher deposition efficiency when sprayed with kerosene HVOF systems
  • See Amperit 518 or:
  • Used for general wear, paper rolls, corrugated rolls, wire drawing equipment, fan and compressor blades, pump seals and housing, machine parts, process rolls in steel production, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 17Co | 30/5 µm
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/10 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 17Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Coarse WC
  • Max. operating temperature 500 °C
  • Higher ductility than WC 12Co due to higher Co content
  • Hard, dense coatings with low sliding wear and high impact resistance
  • Protection against fretting and abrasion
  • Used in aviation applications (fan and compressor blades, mid-span stiffeners, flap tracks, etc.), extrusion dies, glass industry, paper mill rolls, pump parts, wire drawing equipment, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: Cold spraying, HVOF, HVAF

     
 

Remarks:

  • Nanometric WC
  • For nano structured coatings with superior surface finish
  • Excellent wear resistance against media containing micron and submicron sized abrasives
  • Developed for applications in paper and foil industry such as calender rolls, coater blades, film rolls
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Nanometric WC
  • For nano structured coatings with superior surface finish
  • Excellent wear resistance against media containing micron and submicron sized abrasives
  • Developed for applications in paper and foil industry such as calender rolls, coater blades, film rolls
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 25/5 µm
Chemistry: WC 10Co 4Cr
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Medium WC
  • C: 5-6%
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Hard chrome replacement
  • Used for cylinder rods, ball valves, oil field equipment, steel process rolls, etc.
  • Suitable for thin, dense and smooth coatings as economic hard chrome replacement with superior wear performance applied e.g. by HVAF, ID-HVOF/HVAF
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Sintered and crushed
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Medium WC
  • C: 5-6%
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Hard chrome replacement
  • Used for cylinder rods, ball valves, oil field equipment, steel process rolls, etc.
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Submicron WC
  • For excellent surface finish
  • Developed for applications in paper and foil industry such as calender rolls or coater blades
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Submicron WC
  • For excellent surface finish
  • Developed for applications in paper and foil industry such as calender rolls or coater blades
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 30/5 µm 
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Medium WC
  • For coatings on valve components working in high pressure and salt water environments, e.g. in submarine oil & gas fields
  • For cavitation resistance coatings and impact tolerance, e.g. on hydroturbine runners, see Amperit 558
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • For coatings on valve components working in high pressure and salt water environments, e.g. in submarine oil & gas fields
  • For cavitation resistance coatings and impact tolerance, e.g. on hydroturbine runners, see Amperit 558
 
     

 

Tungsten carbides (WC-Ni) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 12Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • Higher corrosion resistance than WC-Co and better ductility
  • Typical applications are oil field equipment, ball and gate valves
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 42CrC 16Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Dense and ductile coatings with high cavitation resistance for pump and valve parts, piston rods
  • Economical alternative to WC-Co-Cr for selected applications
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Smooth coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls in steel production, seal rings, etc.
 
     

 

Tungsten carbides (WC-CrC-Ni) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 20CrC 7Ni
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Max. operating temperature 750 °C
  • Higher oxidation and corrosion resistance than pure WC-Ni or WC-Co based coatings
  • Dense coatings with fine microstructure and high bond strengths
  • Used for mud pump rotors, ball and gate valves, pump rotors, furnace rolls, calender rolls, film rolls, seal rings, etc.
 
     

 

Tungsten carbides (WC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 18NiMoCrFeCo | 45/15 µm
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Alternative to WC-Co-Cr
  • For very dense and ductile coatings with good abrasion, erosion and sliding wear resistance
  • Excellent corrosion resistance in seawater, diluted mineral and organic acids
  • Used for parts applied in marine environments, petrochemical and off-shore applications, etc.
 
     

 

Tungsten carbides (WC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 30WB 10Co
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Medium WC
  • Wear and corrosion protection in molten metal
  • Specially developed for Zn bath rolls in Continuous Galvanizing Lines (CGL)
  • Typically applied with sealer
  • See also Amperit 512
 
     

 

Tungsten carbides (WC-based others) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 15FeCrAl
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Green carbide powder: free of Ni and Co
  • Wear resistant coating with Ni- and Co-free metallic binder, replacement for WC-Co or WC-Ni
  • Used in food industry, fresh water treatment, automotive industry
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 30/5 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, HVAF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 38/10 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 45/15 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 53/20 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered
Suitable for deposition techniques: HVOF, atmospheric plasma spraying (APS)

     
 

Remarks:

  • Fine WC
  • Max. operating temperature 500 °C
  • CoCr matrix shows higher corrosion and abrasion resistance than Co matrix
  • Useable in water based solutions and wet corrosive environments
  • Smooth coatings with fine microstructure and high bond strengths
  • Hard chrome replacement
  • Used for paper rolls, corrugated rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mud pump rotors, process rolls in steel production
  • Finer particle size available only on request
 
     

 

Tungsten carbides (WC-Co-Cr) thermal spray powders

Particle size: 15/5 µm
Chemistry: WC 10Co 4Cr
Powder type: Agglomerated and sintered (special grade)
Suitable for deposition techniques: HVAF, HVOF

     
 

Remarks:

  • Tailored for thin (sustainable) wear and corrosion resistant HVAF and HVOF coatings
  • Very smooth coatings with fine microstructure and high bond strengths
  • Can replace conventional HVOF coating from WC 10Co 4Cr and Cr3C2-NiCr at temperatures below 500 °C (e.g. Amperit 558, Amperit 584 and Amperit 588)
  • Fine WC
  • Suitable for hard chrome replacement
  • Product is suitable for so-called Flash Carbide coatings  
 
     

 

Surfit® hard phase powders

Carbide mixes overlay welding powders

Höganäs offers a wide range of Surfit powder mixes with Ni self-fluxing (SF) alloys and tungsten carbides.

With a broad portfolio of Ni self-fluxing alloys in combination with different tungsten carbides, we tailor mixes to meet the application requirements.

  • Ni self-fluxing alloys
  • Amperweld® Tungsten carbides
    • Amperweld CTC - Cast Tungsten Carbides
    • Amperweld SCTC - Spherical Cast tungsten carbide
    • Amperweld MTC - Macroline Tungsten Carbide
  • Amperit® Tungsten carbide cobalt
    • Amperit 519 WC-Co 88-12
    • Amperit 526 WC-Co 83-17

Please contact your local Höganäs sales representative to find a matching Surfit mix for your application.

Particle size: -
Chemistry: 
Powder type: Blended
Typical deposition techniques: Flame spraying, HVOF, laser cladding, plasma transferred arc (PTA), powder welding

 

Contact us

Sales & Technical support
Contact your sales representative for more information and requests.
Contact us
Contact form
Contact persons
Technical area: Surface coating
Select your country *
Type of contact * Sales
Sales
Technical support
Firstname *
Lastname *
Company *
Field of work *
CEO/owner
Purchasing
Design engineer
Business developer
Machine operator
Other
E-mail *
Phone of work *
Your message *

Privacy policy

I agree that Höganäs can handle my personal data in order to contact me. My contact information may also be used in marketing purpose, such as newsletters and other relevant information. The data will not be shared with a third party. With my consent, I also confirm that I am over 16 year old.

More information about how we handle personal data can be found in our privacy policy.

You must accept the terms of service before you can proceed.

Thank you for contacting us

We appreciate you contacting {{contact.TypeOfContact}} about {{contact.TechnicalArea}}.
One of our colleagues will get back to you shortly.

Have a great day!
/Höganäs

Something went wrong